eigrp
Ticket #17 - Repubished
24/07/11 17:26 Filed in: IP Services
I am reposting here Lab 17, which was published on ccieflyer.com. Next ticket, Ticket 18, which will be about MPLS and Security will be published next month on CCIEFlyer.com, then it will be republished here again.
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
For the solution Click here
For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
Network diagram
IGP diagram
Lab file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
- R3 is the DHCP server on V100.
- R1 was configured to be a backup for the DHCP server on R3. R1 is using object tracking and EEM to do so.
- However, the solution is not working and even if it was its too slow and unreliable. Fix the problems.
- Do not use BFD, its not working on dynamips :)
For the solution Click here
For more mini labs, have a look at the mini labs page.
Also have a look at the complete troubleshooting workbook.
Ticket #17
21/01/11 12:15 Filed in: IP Services
Ticket #07
09/01/10 20:37 Filed in: IPv6
Network diagram
IGP diagram
Lab file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
R2 can't ping to R1's Lo0 IPv6 address from all of its interfaces. Fix the problem.For the solution Click here
Ticket #06 video solution
04/01/10 04:24 Filed in: video
Ticket #06
25/12/09 22:49 Filed in: IGP
Network diagram
IGP diagram
Lab file
This lab is using dynamips. Please follow the instructions found here about how to use the lab file.
The problem:
R2 can't ping both R1's Lo11 and R4's Lo44 at the same time from all its interface. Fix the problemFor the solution Click here